300-115 IT-Prüfungsvorbereitung, 300-115 Prüfungsunterlagen it-pruefungen.de

Prüfungsnummer:300-115

Prüfungsname:Implementing Cisco IP Switched Networks (SWITCH v2.0)

Version:V16.99

Anzahl:201 Fragen

Unsere Prüfungsfragen sind identisch mit den bei anderen Anbieter. Wir versprechen ihnen 100% Erfolgsgarantie. Die Abdeckungsrate unserer Unterlage ist mehr als 99%.

Inhalt der Prüfungsfragen:

QUESTION: 1

A network engineer wants to make sure that an access switch will never become a Spanning Tree root for VLAN 5. What action will accomplish this task?

A. adjust STP priority to the maximum value B. disable STP globally C. apply root guard to all outgoing neighbor interfaces D. enable MSTP and use a different revision number than all other switches

Answer: A

QUESTION: 2

Which authentication service is needed to configure 802.1x?

A. RADIUS with EAP Extension B. TACACS+ C. RADIUS with CoA D. RADIUS using VSA

Answer: A

QUESTION: 3

Which switch feature determines validity based on IP-to-MAC address bindings that are stored in a trusted database?

A. Dynamic ARP Inspection B. storm control C. VTP pruning D. DHCP snooping

Answer: A

QUESTION: 4

What is the default amount by which the hot standby priority for the router is decremented or incremented when the interface goes down or comes back up?

A. 1 B. 5 C. 10 D. 15

Answer: C

QUESTION: 5

Which feature describes MAC addresses that are dynamically learned or manually configured, stored in the address table, and added to the running configuration?

A. sticky B. dynamic C. static D. secure

Answer: A

QUESTION: 6

Which configuration command ties the router hot standby priority to the availability of its interfaces?

A. standby group B. standby priority C. backup interface D. standby track

Answer: D

Unsere Prüfungsunterlage Prüfungsvorbereitung zu Cisco CCNP Routing and Switching 300-115（Implementing Cisco IP Switched Networks (SWITCH v2.0)）www.it-pruefungen.de enthältet alle echten, originalen und richtigen Prüfungsfragen und Antworten. Die Abdeckungsrate unserer Unterlage (Fragen und Antworten) zu Cisco CCNP Routing and Switching 300-115 ist normalerweise mehr als 99%.

Vorbereitung zur 300-101 Prüfung Testfragen und antworten it-pruefungen.de

Prüfungsnummer:300-101

Prüfungsname:Implementing Cisco IP Routing (ROUTE v2.0)

Version:V16.99

Anzahl:420 Fragen

Unsere Prüfungsfragen sind identisch mit den bei anderen Anbieter. Wir versprechen ihnen 100% Erfolgsgarantie. Die Abdeckungsrate unserer Unterlage ist mehr als 99%.

Inhalt der Prüfungsfragen:

1.A network engineer notices that transmission rates of senders of TCP traffic sharply increase and decrease simultaneously during periods of congestion. Which condition causes this?

A. global synchronization B. tail drop C. random early detection D. queue management algorithm

Answer: A

2.Which three problems result from application mixing of UDP and TCP streams within a network with no QoS? (Choose three.)

A. starvation B. jitter C. latency D. windowing E. lower throughput

Answer: A, C, E

3.Which method allows IPv4 and IPv6 to work together without requiring both to be used for a single connection during the migration process?

A. dual-stack method B. 6to4 tunneling C. GRE tunneling D. NAT-PT

Answer: A

4.Which statement about the use of tunneling to migrate to IPv6 is true?

A. Tunneling is less secure than dual stack or translation. B. Tunneling is more difficult to configure than dual stack or translation. C. Tunneling does not enable users of the new protocol to communicate with users of the old protocol without dual-stack hosts. D. Tunneling destinations are manually determined by the IPv4 address in the low-order 32 bits of IPv4-compatible IPv6 addresses.

Answer: C

5.A network administrator executes the command clear ip route. Which two tables does this command clear and rebuild? (Choose two.)

A. IP routing B. FIB C. ARP cache D. MAC address table E. Cisco Express Forwarding table F. topology table

Answer: A, B

6.Which switching method is used when entries are present in the output of the command show ip cache?

A. fast switching B. process switching C. Cisco Express Forwarding switching D. cut-through packet switching

Answer: A

7.Which two actions must you perform to enable and use window scaling on a router? (Choose two.)

A. Execute the command ip tcp window-size 65536. B. Set window scaling to be used on the remote host. C. Execute the command ip tcp queuemax. D. Set TCP options to "enabled" on the remote host. E. Execute the command ip tcp adjust-mss.

Answer: A, B

Unsere Fragenkatalog Prüfungsvorbereitung zu Cisco CCNP Routing and Switching 300-101（Implementing Cisco IP Routing (ROUTE v2.0)）it-pruefungen.de enthältet alle echten, originalen und richtigen Prüfungsfragen und Antworten. Die Abdeckungsrate unserer Unterlage (Fragen und Antworten) zu Cisco CCNP Routing and Switching 300-101 ist normalerweise mehr als 99%.

Prüfungsvorbereitung 200-125 Testfragen Braindumps Schulungsunterlagen it-pruefungen.de

Prüfungsnummer:200-125

Prüfungsname:CCNA Cisco Certified Network Associate CCNA (v3.0)

Version:V16.99

Anzahl:735 Fragen

Unsere Prüfungsfragen sind identisch mit den bei anderen Anbieter. Wir versprechen ihnen 100% Erfolgsgarantie. Die Abdeckungsrate unserer Unterlage ist mehr als 99%.

Inhalt der Prüfungsfragen:

1.Which technology supports the stateless assignment of IPv6 addresses (Choose two) ? A. DNS B. DHCPv6 C. DHCP D. autoconfiguration Answer: BD

2.After you configure the Loopback0 interface, which command can you enter to verify the status of the interface and determine whether fast switching is enabled? A. Router#show ip interface loopback 0 B. Router#show run C. Router#show interface loopback 0 D. Router#show ip interface brief Answer: A

3.What are two requirements for an HSRP group? (Choose two.) A. exactly one active router B. one or more standby routers C. one or more backup virtual routers D. exactly one standby active router E. exactly one backup virtual router Answer: AD

4.Which command sequence can you enter to create VLAN 20 and assign it to an interface on a switch? A. Switch(config)#vlan 20 Switch(config)#Interface gig x/y Switch(config-if)#switchport access vlan 20 B. Switch(config)#Interface gig x/y Switch(config-if)#vlan 20 Switch(config-vlan)#switchport access vlan 20 C. Switch(config)#vlan 20 Switch(config)#Interface vlan 20 Switch(config-if)#switchport trunk native vlan 20 D. Switch(config)#vlan 20 Switch(config)#Interface vlan 20 Switch(config-if)#switchport access vlan 20 E. Switch(config)#vlan 20 Switch(config)#Interface vlan 20 Switch(config-if)#switchport trunk allowed vlan 20 Answer: A

5.Which three commands can you use to set a router boot image? (Choose three.) A. Router(config)# boot system flash c4500-p-mz.121-20.bin B. Router(config)# boot system tftp c7300-js-mz.122-33.SB8a.bin C. Router(config)#boot system rom c7301-advipservicesk9-mz.124-24.T4.bin D. Router_ boot flash: c180x-adventerprisek9-mz-124-6T.bin E. Router(config)#boot flash:c180x-adventerprisek9-mz-124-6T.bin F. Router(config)#boot bootldr bootflash:c4500-jk9s-mz.122-23f.bin Answer: ABC

Unsere Prüfungsunterlage Prüfungsvorbereitung zu Cisco CCNA Routing and Switching 200-125（CCNA Cisco Certified Network Associate CCNA (v3.0)）enthältet alle echten, originalen und richtigen Prüfungsfragen und Antworten. Die Abdeckungsrate unserer Unterlage (Fragen und Antworten) zu Cisco CCNA Routing and Switching 200-125（TS:CCNA Cisco Certified Network Associate CCNA (v3.0) ）ist normalerweise mehr als 99%.

Jedem, der die Prüfungsunterlagen und Software zu Cisco CCNA Routing and Switching 200-125 （TS:CCNA Cisco Certified Network Associate CCNA (v3.0) ） von www.it-pruefungen.de nutzt und die IT Zertifizierungsprüfungen nicht beim ersten Mal erfolgreich besteht, versprechen wir, die Kosten für das Prüfungsmaterial 100% zu erstatten.