QUESTION: 1

it-pruefungen.de-You need to quickly determine if a software upgrade is available for an HPE 3PAR StoreServ system. Where can you locate this information?

A. HPE 3PAR Firmware Update Notification Utility (FUNU) B. HPE 3PAR Integrated Management Console (IMC) C. HPE 3PAR Service Processor Onsite Customer Care (SPOCC) D. HPE 3PAR StoreServ Management Console (SSMC)

Answer: C

 Prüfung Exam HPE0-J79 study guide Test pdf Architecting Multi-Site HPE Storage Solutions (ICND2 v3.0)

QUESTION: 2

it-pruefungen.de-Which network requirements and HPE best practices must be discussed with a customer before implementing an HPE StoreVirtual multi-site solution in a 1 GbE environment?

{Select two)

A. using as few Gb Ethernet links between sites as possible B. sharing of the WAN bandwidth between servers C. need for 50 MB/s of bandwidth on each storage node D. round top latency of less than 2 ms between sites E. removal of firewalls. NAT devices, and QoS

Answer: A,D

Prüfungsvorbereitung Studienmaterialien HPE0-J79 deutsch Architecting Multi-Site HPE Storage Solutions

QUESTION: 3

it-pruefungen.de-A customer with multiple Oracle databases in their environment reports that users are experiencing slow application response time. You need to create an optimized solution for this customer. You monitored database performance using Oracle AWR server, and storage performance monitoring. The revealed that there is a high I/O wait and the average I/O latency is -30 ms. which is causing slow response times.

Which solution should you propose to address the performance problem?

A. HPE 3PAR storage array with high performance spinning disks with HPE 16 Gb/s StoreFabnc B. HPE 3PAR all-flash storage array with HPE 16 Gb/s StoreFabnc C. HPE 3PAR Storage Array with a sufficient number of spinning disks with HPE 16 Gb/s StoreFabric D. HPE 3PAR hybrid storage Array with spinning disks. Adaptive Flash Cache, and AO with HPE 16 Gb/s StoreFabric

Answer: B

QUESTION: 4

it-pruefungen.de-A customer acquired an HPE 3PAR all-flash array to accelerate their databases. They are currently using synchronous replication, but It is causing slow I/O due to limited network bandwidth and latency, both of which cause application slowdown

Which alternative solution should you propose to address the issue''

A. Periodic Asynchronous Remote Copy B. Asynchronous Streaming Remote Copy C. Peer Persistence D. Synchronous Long Distance Remote copy

Answer: B

IT-Prüfungen HPE0-J79 Architecting Multi-Site HPE Storage Solutions

QUESTION: 5

You complete a storage design in the HPE Storage Sizer tool. What is the easiest way to get this design into Sales Builder for Windows (SBW) to create a quote?

A. Export the Bill of Materials to Excel, save the file to a csv. and import to SBW. B. Use the Solve/Submit button In the Sizer to create the SBW quote automatically C. Use the supplied Bill of Materials from the Slzer to create the quote manually D. Use the HPE Storage Sizer SBW export function lo create a file to import into SBW

Answer: D

Q1

it-pruefungen.ch-You present an HPE 3PAR StoreServ 8450 all-flash solution to a customer's C-level management. Which HPE 3PAIR technologies should you focus on to convince the CIO that your proposed solution is more cost-efficient competitor products? (Select two.)

A. thin deduplication B. adaptive sparing C. express writes D. virtual copy E. virtual domains

Answer: A,B

IT-Schulungen Exam Dumps HPE0-J80 Prüfungsfragen Delta - Architecting Multi-Site HPE Storage Solutions

A. CPG B. VV C. RAID D. RCG

Answer: C

Q3 it-pruefungen.ch-You are designing an iSCSI solution for a customer with one data center, who is investing in a second data center that will be ready in the near future. The networking infrastructure of the current data center is generally sufficient for use with an iSCSI storage solution, but it is from a different vendor. The new data center will be equipped with current HPE Networking switches.

A. For maximum performance, Jumbo Frames should be configured on the storage nodes only B. Jumbo Frames are only required for low latency applications C. Jumbo Frame sizes are not standardized across all switch vendors D. Only switch ports must be configured to forward Jumbo Frames

Answer: C

HPE0-J80 Prüfungsfragen, HPE0-J80 Examensfragen Delta - Architecting Multi-Site HPE Storage Solutions (ICND2 v3.0)

Q4 it-pruefungen.ch-As part of solution tuning, you want to add online, application-consistent snapshots to a customer's environment. Which tasks must be performed? (Select two.)

A. Delete the snapshot B. Stop the VM C. Release file locks D. Flush the buffers E. Quiesce the file system

Answer: D,E

Q5 Which additional value should you focus on during a solution presentation for an HPE 3PAR StoreServ system using 3.84 TB cMLC SSD drives to appeal to the interests of the company's CFO?

A. savings of the solution when compared to a similar configuration using 10 k SAS drives B. savings of the solution when compared to 1.92 TB cMLC SSD C. performance gain when compared to 1.92 TB cMLC SSD D. savings of the solution, which approaches the cost of 15 K SAS drives

Answer: A

Prüfungsvorbereitung Studienmaterialien HPE0-J80 deutsch Delta - Architecting Multi-Site HPE Storage Solutions

Q6 A customer has a multi-site environment and plans to consolidate file-and-block-level data. A proof of concept is arranged to familiarize the customer with HPE 3PAR StoreServ File Persona functionality. Which statement is true when failing over file-level data between the arrays?

A. The Peer Persistence Arbitrator must register the file shares before a failover is initiated. B. An automated failback is initiated once the primary storage system comes back online. C. The clients must reconnect to NAS shares once failover is complete. D. A second cluster IP must be configured as a DNS alias for the file shares running on the HPE 3PAR StoreServ.

Answer: D

QUESTION: 1

it-pruefungen.ch-An HP Provision switch is controlled by a team of HP VAN SDN Controllers and operates in hybrid OpenFlow mode. The team has added several flow entries. A valid unicast packet arrives on the switch that does not match any flow entries.

How does the switch handle this packet?

A. The switch encapsulates the packet in an OpenFlow packet and sends it to the controller. B. The switch forwards the packet to the controller over a service insertion tunnel. C. The switch drops the packet. D. The switch forwards the packet normally.

Answer: D

Prüfungsvorbereitung Exam HPE0-Y53 Testfragen Building HPE SDN and FlexNetwork Solutions

it-pruefungen.ch--A company has an HP VAN SDN Controller Network administrators plan to design their own tools to automate:

-The retrieval of information about OpenFlow devices and end hosts

-Backups and restores of the controller

What should the administrators use in these tools to automate these processes?

A. CLIcommands B. REST API calls C. Java script D. OpenStackAPI calls

Answer: B

HPE0-Y53 Prüfungsfragen Building HPE SDN and FlexNetwork Solutions

QUESTION: 3

it-pruefungen.ch-A network administrator has installed an SDN application from the HP SDN AppStore on the HP VAN SDN Controller. If the application is running and ready to service requests, which status should the administrator see in the controller's Applications window?

A. RUNNING B. ACTIVE C. STARTED D. UP

Answer: B

QUESTION: 4

it-pruefungen.ch-The links marked FCoE link shown in the exhibit are links that need to carry FCoE traffic. What is the proper redundant design for IRF 1?

A. One VSAN, which is bound to FCoE links on both of the physical devices B. Two VSANs, each of which is bound to the FCoE links on only one of the physical devices C. Four VSANs, two of which are assigned to FCoE links on one of the physical devices and two of which are bound to links on the other device D. Two VSANs, each of which is bound to FCoE links on both of the physical devices

Answer: D

Prüfungsvorbereitung Studienmaterial HPE0-Y53 deutsch Building HPE SDN and FlexNetwork Solutions

QUESTION: 5

An SDN application submits a username and password to authenticate to the HP VAN SDN Controller, which is configured for local authentication. If the username and password are valid, what does the controller do?

A. creates a security hash, which the application uses to generate a valid X-Auth-Token B. sends the application an X-Auth-Token C. forwards the application an Access-Accept packet D. requests the last valid token the application used

Answer: B